10PC CAT40 15 .747 Pull Stud LOT Coolant Thru Retention Knob For DMG Mori Doosan

Description

We also sell machine tools such as End Mill Tool Holder、PULL STUD, so the more you buy, the more favorable.Welcome to store!!!
10PC CAT40 15 .747 Pull Stud LOT Coolant Thru Retention Knob For DMG Mori Doosan
Fits on Amura-Seiki, Fadal, comet, Daewoo, Dah Lih, Hass, Howa Kogyo, Ikegal, Kearny-Trecker, Kia, Kitamura, Mitsubishi, Miyano, OKK, Okuma Howa, Roku-Roku, Toshiba, Toyoda, YCI, Sharp
Specification
Material：40cr
Head Diameter D1: 0.747"
Head Angle: 15°
Drawbar Thread Size: 5/8"-11
Machine Taper Size: CAT40
MACHINE BUILDER DMG Mori, Doosan, Feeler, Mori Seiki
Neck Diameter D2: 0.549"
Hole D3: 0.281"
Pilot D4: 0.641"
Overall Length L: 2.001"
Shoulder To Head L1: 0.787"
Shoulder To End L2: 1.024"
COOLANT HOLE
This pull stud is compatible with the following:
J&M JM71123
TJ Davies PSC-470 X 15
Lyndex C40-1500-ISO
Collis 69004
Command RS4E-0114-C
Feature:
1、Using 40cr forging.
2、After carburizing, the outside of material is hardened, and the inside of material is still soft and has enough toughness. Therefore, Material has higher wear resistance and better toughness.
3、CNC on all critical surfaces including a pilotunder the flange of retention knob for full contact between tool holder's taper end and retention knob. Precision grinding pull stubs have higher surface finish and dimension accuracy.  The fitting accuracy is obviously higher than that of machine pull stubs, effectively reduces the error of  machine tool and cooperation, so as to improve the accuracy and stability of the connection and improves the precision of the machine tools and lengthens the service life
4、Precision grinding pull stubs have higher surface finish and dimension accuracy.  The fitting accuracy is obviously higher than that of machine pull stubs, effectively reduces the error of machine tool and cooperation, so as to improve the accuracy and stability of the connection and improves the precision of the machine tools and lengthens the service life.
5、Precision finished on the bottom of the flange to improve fitting with the bottom nose of the taper on the tool holder.High quality black oxide finish can ensure long pull stub life and a non-rusting surface.
10 x CAT40 Pull Stud
CCCBD7862
We have other holders & collet chucks & pull stud available at my ebay store! Welcome to the store to watch!
1. Paypal, Visa, and MasterCard are the accepted forms of payment.
2. We ship to your eBay or PayPal Please make sure your eBay and PayPal address is correct before you pay.
3. Please be kind to contact us to cancel the order if you can’t pay in time or don’t want the item any more.
1. Shipment will be made within 3 working days once your payment has been cleared.
2. Delivery time depends on destination and other factors. For faster shipping methods like UPS, USPS, etc., please contact us to know the extra charges.
Your satisfaction is our long term pursuit and up-most concern. Please inspect your delivery immediately it arrives and notify us if there are any problems.
1.  Please kindly help to test the items again in order to eliminate improper use factor.
2.  Refund will be issued once returned item received.
3. If you satisfy with our product and service, please leave positive feedback, We appreciate your positive feedback.
4.  Please email us before leaving any negative feedback or opening any dispute on the site.We understand the concerns you might have and we will try our best to resolve the problem for you.
Your satisfaction is our long term pursuit and up-most concern. If you want to get in touch with us, it is preferable that you email us. We will try to answer most emails within 2 days.
Certain images/photos are the copyrighted property of JupiterImages and are used with permission under license.