4PCS CAT 40 ER 32 STUB NOSE RIGID 1.10" COLLET CHUCK TOOL HOLDER ER32 .0001" L[

Description

SHARS 4PCS CAT 40 ER STUB NOSE RIGID COLLET CHUCK HOLDER V-FLANGE .0001" Runout
NEW
We don't sell  ER Stub Nose Rigid Holders, we sell
ER Stub Nose Rigid Holders
life!
Quality Guarantee
Product Code
202-1495(4)
Product description
Taper: CAT40
Drawbar Thread: 5/8" -11
Collet Series: ER-32
Range: 1/8-3/4"
Nose Diameter: 40mm
Proj (L)/Gage Length: 1.10"
Concentricity/runout less than: 0.0001" / 0.003mm
Collet Chuck accepts all ER32 collets
Works on all CAT40 machines
Product application
Product features
Manufactured
by an
ISO 9001
certified manufacturer with 60 plus years of hands-on experience in the CNC machining industry.
Unique design feature in the flange to minimize the off-balance nature of CAT 40 taper specification.  On the side of flange where a half spherical hole is located, a "
wall
" is built around this hole to compensate the weight of the metal chips lost from forming this spherical hole.  This design allows the left side and right side of the holder to achieve 50-50 perfect weight distribution in its upright position, like the position inside a machine spindle. Symmetrical design in evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.
Presetter and balancing Design, in a generic standard ER collet nut, an internal ring is off-centered so that an ER collet can be easily snapped into it and holds the ER collet in place.  To minimize this off-centering,
SHARS
ER collet nut is optimized to distribute the flat sides' area to off-set the off-center.
Made of Superior Alloy Steel ,body and nut select Forging Parts, high precision and long life.
Hardened to HRC 56-60. Cryogenic treatment.
Taper ground = AT3 or better accuracy standard for maximum contact with spindle. All critical surface are precision ground.
Certification included with each holder, documented TIR taper accuracy, and balance measurement.
T.I.R..0001". Concentricity is less than
0.0001"
from taper O.D. to collet pocket I.D.
Each holder comes with a lab certificate
on its taper accuracy and runout measurement
on its taper accuracy and runout measurement
The thread select grinding process to obtain the better interchangeability.
Coolant through capability
The inner holes will be inspected on product line one hundred percent by USA air jet instrument.
The CAT40 CAT50 BT30 BT40 7:24 taper is inspected on production line by
Stotz
Air/Electronic instrument to ensure AT3 or better taper contact
We have other holders & collet chucks available at
My Ebay Store:
If you need out relate items,  click the Product Code to the item page
HI-QC CAT40 HAAS PULL STUD RETENTION KNOB
Product Code:
202-5925
11
1/8 - 3/
4
" ER
32
COLLETS SET MILLING LATHE .0004
Product Code:
202-5568
CAT 40 UNIVERSAL CNC TOOL HOLDER TIGHTENING FIXTURE
Product Code:
202-2612
Shars Clamping Hex Nut for CAT, BT,40/50 ER Stub Nose Rigid Holders
Product Code:
202-1500
SHARS 6" 670V Milling Vise +/-0.0004
6" wide jaw plate, 7.50" inner jaw opening, 15.80" outer jaw opening
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 2.875" +/-0.0005"
Clamping repeatability +/-0.0004"
Lifetime limited warranty
To learn more,
click here to 202-0993
SHARS 6" 660U Milling Vise +/-0.0004
6" wide jaw plate, 6.25" inner jaw opening, 15" outer jaw opening
Single piece of stationary jaw and vise body to enhance clamping rigidness and accuracy
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 3.189" +/-0.0005"
Clamping repeatability +/-0.0004"
Lifetime limited warranty
To learn more,
click here to 202-0995
SHARS 6" 600DS Double Station Milling Vise +/-0.0002
6" wide jaw plate
4.9" jaw opening in double station, 12" jaw opening in single station (conversion kit included)
Unique leadscrew design to allow to clamp either same sized or dissimilar sized parts
Jaw lift prevention mechanism by eccentric pin design
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 3.25" +/-0.0005"  (matched bed height at no additional cost)
Clamping repeatability +/-0.0002"
Lifetime limited warranty
To learn more,
click here to 202-0999
SHIPPING: UPS Ground
Buyer pays
ACTUAL UPS shipping & insurance, and a .00 handling fee
for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package's recipient may need to pay these to clear customs.
PAYMENT:
We accept : VISA, MasterCard and E-Check on PayPal.com
Illinois residents add 8% sales tax.
RETURNS:
If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.