8 station steel gang lathe holders custom finish on your American Way Omniturn

Description

These are almost-finished gang lathe tool holders, with 8 tool holes pre-drilled to 39/64" on 3/8" tool center height.
The holes are on 1.20" centerline spacing with each other.
They are ready to have the 5/8" bores finish bored on your lathe for the ultimate in center height and spacing accuracy, or to customize hole sizes ie: for 16mm tooling, other etc.
They are made of steel with the following specs:
10-3/4"
long
1.45"
deep
1.136"  thickness, the bottom locating surface is precision ground.
.140" lower lip depth
8 tool holes drilled to 39/64" (.609")
hole centerlines are 3/8" above bottom mounting surface. (3/8" tool height)
hole centerlines are spaced 1.20" from each other. (compare to Omniturn's holders of only (1.1" spacing)
5 counter-bored holes for 3/8" socket head cap screws
3 set-screw holes per tool (5/16"-18)
(no hardware included)
I got these holders with a used American Way CNC lathe I purchased locally here in southern Oregon, and I don't know much more about them.
Except for having unfinished tooling holes, and not being black-oxide, they appear identical to my other stock/finished American Way 8-station holders.
It is possible these could be old stock unfinished oem American Way holders. (made here in southern Oregon).
Or if they were shop made, they are very well done.
These appear to have been sitting for years and have some slight corrosion and dings but nothing a typical light file/stoning wouldn't take care of before you'd finish machine anyway.
Wrapped individually in bubble and shipped USPS Priority, for multiples each additional ships free.
Local pickup is free.