Automatic screw feeder dispenser Screw arrange feeding machine 1.0-5.0mm EN

Description

Product Description
Specification: European standard,
please note before you place the order
1,the widest range of usage
Can be made of any specifications, between 1.0 ~ 5.0 mm
2,can use special screws
Can use ordinary screw, flat head screws with washers screw, tapping screw and so on many kinds of screws, consult the seller don't understand.
3,orbit size can be adjusted
Accurate can be adjusted the removable, orbital size adjustment easy, cooperate with screw size, whether in cm or inch specifications, are able to operate freely.
4,to reduce inventory cost reduction
One piece machine can adjust out of a variety of specifications using screw, the user can reduce the cost of equipment procurement.
5,size adjustable vibration
Seismic distance is small, strong vibration, screw arrived at the front end point, not running forward and obvious effect to the speed of the screw and the production speed.
6,the humanized management for projects to be more
Send material and the driving mode of vibration independence, are free to set the ideal stop time, will not cause mutual interference and influence the normal function.
Behind the PCB and the machine is equipped with earth jack, the machine fault.Roller rolling blanking See, the screw on arriving at the front of the vibration time, screw speed in orbit,
there is PCB independent offer to cooperate with production line homework time.100-240 - v voltage input, voltage transformer of 15 v, provide the correct voltage,
makes the machine can be used anywhere in the world and it works, will not be affected by the input voltage is too high or low.