-40%
Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use
Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use
Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use
Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use
Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use
Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use
Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use
Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use
Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use
Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use
Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use
Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use

Coherent OBIS 594-100 LS OPSL Laser Complete System! Tested with 12 hours use

$ 2376

Availability: 100 in stock
  • Country/Region of Manufacture: Singapore
  • Condition: Laser reads 12 hours use. Tested to work 100% properly. All new accessories
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Custom Bundle: No
  • Intended Use/Discipline: Holography
  • All returns accepted: Returns Accepted
  • MPN: Does Not Apply
  • Brand: Coherent
  • Model: OBIS 594-100 CDRH
  • Item must be returned within: 14 Days
  • Modified Item: No
  • Return shipping will be paid by: Buyer

    Description

    This OBIS 594-100
    system
    works perfectly with low noise TEM 00 output. After warmup it is suitable for Holography. SFPI testing
    available
    upon request. The laser head with only 12 hours operates to specification power at about 68% of the diode current limit. This is exceptional even for a new OPSL design laser. The laser should have a long lifetime. The entire OBIS accessory kit including the power supply is new; I had to open the seals to set up and test. The Omron heatsink is also new and has been
    professionally
    drilled and tapped to be very flat for laser mounting with Artic silver thermal grease. LC thermometer on heat sink-keep under 35 degrees C. A nice very slightly used laser in new operating condition with all new OBIS accessories. Software chip
    included
    with manual and software. If you check prices at Edmund Optics you will find about K with heat sink. Buy here for so much less. This is a very nice laser system. Lab Jack and power meter are not included.  The line you see in the beam photo is an iPhone artifact due to the bright beam. beam is perfect. This listing cannot be exported due to cost restrictions on eBay Global shipping. USA Only-sorry.
    FREE SHIPPING TO THE USA!!!               CHECK MY FEEDBACK!!!
    THANKS FOR LOOKING!!!