Coherent Sapphire 460-25 Laser System with DEEP BLUE SLM output NOT 488 nm!!!

Description

Up for sale is a professionally tested DEEPER BLUE 460 nm Coherent Sapphire laser system with a boxed USB style
Sapphire LP driver
. The controller is calibrated for all Sapphire LP lasers and has a nice new aluminum box (painted steel vented lid) with a new DC power adaptor. Power is programmed (fixed) for this head at 25 mW with pure SLM output. Measured power is almost 30 mW @ 460 nm (see pictures). These 460 nm laser heads were used in film scanning machines and have high standby (diode off) hours. Hours on this laser head show 70K but that would be 3.5K at a 5% duty cycle and it was probably lower than that. Outputting 290% rated power at 79% diode current max. Good laser.
INCLUDES:
*Sapphire OPSL-LP control box with RS232 and analog input ports inside. Professionally built. New DC adaptor (12V @ 10A). Well ventilated. New Coherent head cable. Power cord.
*Sapphire 460-30 laser head with SLM testing for ultra low noise and long coherence length. Super flat professional grade heat sink with head indexing pins....swap heads to another wavelength, just don't overtighten the screws as that kills Sapphires....1.0 Newton Meter max!  Healthy laser runs at 1.65 A on a 2.1 A limit for 79% maximum diode current! High quality low M squared TEM 00 beam. No head fan is required for this laser. :)
*Free shipping to the USA
*A 14 day warranty after receiving the laser for testing.
*Product support after the sale...if you have questions about the laser ask! We are "Sam's Laser FAQ"!  Professionally tested lasers with a warranty!! Sapphire OPSL manual is available via e mail.
FREE SHIPPING TO THE USA!!! CHECK MY FEEDBACK AND BUY IT NOW!!!! NO RISK!!!