-40%
Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM
Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM
Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM
Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM
Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM
Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM
Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM
Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM
Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM
Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM
Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM
Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM

Coherent Sapphire 532-150 SF with CDRH controller, low hours and TEM 00-Pure SLM

$ 2056.56

Availability: 49 in stock
  • Country/Region of Manufacture: Germany
  • Intended Use/Discipline: Raman Spectroscopy, Holography, Research Lab use, Teaching Lab laser, Biological Laboratory
  • Brand: Coherent
  • Modified Item: No
  • Condition: Used excellent condition. Just tuned to pure SLM. Healthy diode. Operates properly.
  • Model: Sapphire 532-150 SF

    Description

    Here is a complete ready to use Sapphire 532-150 system suitable for Holography. The laser head has 1310 hours and operates at a low current (1.6A for 150 mW) compared to the maximum current allowed (2.47A) so the laser should have a long lifetime remaining.  The head is mounted on a heavy professional grade heat sink which should
    require
    no fan unless your lab is 90 degrees F. The pro-grade collimator shown is included and may be removed in a minute if not needed now. Save for later. The Coherent CDRH
    Complient
    controller included (with high
    quality
    head cable) will drive ANY Sapphire LP laser. Adjustable power, press knob to set
    functionality
    . Power display with bar graph. The right stuff. Lab jack and power meter are not included, just laser head platform, head cable, controller and power cord. Manual available via e mail.
    This laser head was just carefully re-tuned for SLM by Sam at Sam's Laser FAQ and now runs pure SLM over a wide power range (at least 50 mW to 150 mW). You can set the power lower as needed...50 mW to 150 mW should be fine. Sam-spected!
    Ready
    for Holograms.
    FREE SHIPPING TO THE USA!!!
    Sorry but no exports on items over ,500