Diy Diamond Lapidary Trim Saw Blades 8 inch Wet Cutting Gemstone Slab Tools

Description

8" inch (200 mm) Ultra Thin Diamond Lapidary Saw Blade Jewelry Gemstone Thin Cutting Blade Disc Code 200*0.5*25
Product Specification:
Outside Diameter: 200mm (close to 8" inch)
Arbor hole: 0.984"(25 mm)
,
Can be used on 1/2"(12.7 mm) or 5/8”(16 mm) arbor with a bushing,  Include a message when you check out telling me what size bushing you require free of charge.
Thickness:   0.02"(0.5mm)
core thickness
/
0.026" (0.65mm)
on the edge where the diamond is.
Material:Tinplate, Diamond
Quantity：1 pieces
Product Description:
Exclusively designed for processing materials for softer high value rocks like turquoise, gaspeite, opals.
These blades are manufactured by crimping Synthetic diamonds directly into the edge of the saw blade.
They are best suited for turquoise, opal, glass, and stones in the 4-7 range on the Mohs hardness scale.
Advantages: achieving satisfactory cutting results and reducing unnecessary material consumption.
This thin diamond lapidary saw blade offers a very good cost effective option for those that want either very thin kerfs or plan on short term use.
This simply means that these blades are meant for small material, not large or slabbing techniques. Also, these blades operate in a single direction so make sure that the arrow on the blade is pointed towards you when mounting.
Use with water as a lubricant.
New, Unused Blade - Not in Original Packaging
These blades were originally packaged in oil so you will see several oil spots on the surface.
We will send out your order within 1-2 days after payment has been received and cleared.
Please let us know if you are looking for other accessories or hardware.
Should you have any queries, please contact me directly.