HAAS CAT40 5PC ER32 3PC ER16 COLLET CHUCK AND 29PC COLLETS PACKAGE NEW

Description

HAAS CAT40 5PC ER32 3PC ER16 COLLET CHUCK WITH 12+7PC ER32 AND 10PC ER16 COLLETS SET
BRAND NEW
Tenth
a
ccuracy on each
ER chuck and collet
High Speed True Balance in 15-20K RPM
5PC ER32 COLLET CHUCK
3PC ER16 COLLET
CHUCK
12PC ER32 COLLET
SET
BY
1/
16
10PC ER16
COLLETS SET BY 1/
32
FREE
HAAS PULL STUD ON
EACH TOOL
HOLDER
FREE SPANNER WRENCH ON COLLET CHUCK
ALL COLLET CHUCK ARE HIGH SPEED PROVED AND
BALANCED
TO G2.5
@ 15-20k
RPM TO
MEET ALL
INDUSTRIAL
REQUIREMENT
With Free HAAS pull stud, can be used on any HAAS CAT40 spindle V mill
Free Shipping in US
Be aware on many bad and rough tooling that you see on site as well. I have many customers asked me the same questions that how about yours vs theirs. I post run out numbers and video in description, and you can test after receive. However, many other vendors are over or false
describe
their tool holders and collets. Based on customers who got ripped off from many cheap sellers, the total run out on their bad tool holders and collets could be in 5 thousands rather than 5 tenth, and the drill chuck could be in 10 thousands, plus pull studs break left right. So regardless how cheap they are, it's useless scrap, which is supposed to be sold by weight, not pieces
This is my chuck and collets, see two videos below, indicator is the same 0.0001". Total run out of holder and good set of collets are less than 0.0005", tool holder alone without collets are 0.0001".  Since it's balanced, so regardless of speed, holder and collets will running true. Both tool holders and collets must be running true in order get total run out to minimum
cat40er321
Video will open in a new window
Using the mobile app? Copy this link into your browser:
cat40er3211
Video will open in a new window
Using the mobile app? Copy this link into your browser:
Features:
5PC CAT40 ER32 Chuck
3PC CAT40 ER16 Chuck
Both
ER32 and ER16 Chuck
Gage or projection length of ER
16
is 2.75"
Accuracy in tenth, 0.0001"
Fully ground flange and V-groove — easy on tool changers for less spindle and
changer maintenance
V-Flange CAT 40 is production balanced to high speed spindle turning and meet standard industrial needs
High Speed True Balance in 15-20K RPM
Hardened and ground to ensure maximum accuracy
Through spindle coolant capability from pull stud to collets
12PC
ER32 Collets Set By
1/16
Ma
de
of
high grade spring steel
12PC by 16th:
1/8"; 3/16";
7/32"
, 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 9/16"; 5/8"; 11/16"; 3/4".
7PC Common Size: 1/8, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4
T.I.R.: 0.0003" or 5u
m
. In order to
make
all collets run
ning
true, on your
side
,
make sure your machine
spindle
and chuck
holder running true, on my side
, I
'll make sure all those collets
running in
tenth
.
Special angled slots increase rigidity
Better overall balance of tool holder assembly
Protects tool holder from contaminants
Use with any standard ER collet chucks for coolant-thru tool applications.
10PC ER16 Collets Set
Ma
de
of
high grade spring steel
10
PC Size
by
1/32
:
1/32", 1/16", 3/32", 1/8", 3/16"
,
7/32", 1/4", 5/16",
11/32", 3/8".
T.I.R.: 0.0003" or 5u
m
. In order to
make
all collets run
ning
true, on your
side
,
make sure your machine
spindle
and chuck
holder running true, on my side
, I
'll make sure all those collets
running in
tenth
.
Special angled slots increase rigidity
Better overall balance of tool holder assembly
Free Items
Include
d in
this pacakge
:
Free
HAAS
CAT
40
pull stud
fit all HAAS CAT40
Spindle
V
Mill
Free ER Spanner wrench
Free Shipping in US.
All
items
include:
5PC
ER32
chuck
, 3PC ER16
c
huck
,
12+7PC
ER32 collets by 16th, 10PC
E
R 16
collets
by 1/32 and more
It's
a value and quality
HAAS tooling
pac
kage
, all ER chucks and holders
have
been high speed pre
-balanced G2.5
@ 20K RPM
. Chuck with
collets together are
in couple tenth
,
any questions, let me
know
Total Run out
Total runout is a sum of runout of collets, chuck or holder, and machine spindle. On CAT40 or BT40 spindle, you're expecting half thousands overall runout with these collets and collet holder. So collets alone is about 3 tenth, then you add chuck run out 1 or 2 tenth, it comes up about half thousands or 5 tenth, so choose correct tooling for correct application
Shipping:
Ship out from Chicago
Free Shipping in US regardless of qty
$
100
ship to Canada via post office
Payment:
Paypal is preferred
Credit card is acceted
Return:
30 Days return policy
Track Page Views With
Auctiva's FREE Counter