MELLES GRIOT 85-GCJ-015-074 DPSS LASER HEAD and Controller 15mW 532nm green NEW

Description

Brand new.
MELLES GRIOT 85-GCJ-015-074 DPSS LASER HEAD and Controller 15mW 532nm green NEW
This includes the 532 nm green laser head, serial number matched Controller, interconnect cables, etc.
Everything as pictured. Laser head,
Driver,
interconnect cable, input power connector.
Ships free in Continental USA, elsewhere ships USPS actual cost only.
Detail from spec sheet:
I. DESCRIPTION: LASER, HEAD, 532 NM (GREEN) II. SPECIFICATIONS: MELLES GRIOT PART NUMBER: 85-GCJ-015-074  1. DPSS-Laser System 2. WAVELENGTH: 532+ 1nm 3. OUTPUT POWER: 13.5 to 16.5 mW 4. BEAM QUALITY (M^2)< 1.2 5. BEAM DIAMETER (VERTICAL & HORIZONTAL): 272 to 368 µm 6. BEAM WAIST LOCATION (X-AXIS & Y-AXIS): 42 + 75 mm 7. WARM UP PERIOD: <= 15 minutes
Wavelength (nm): 532 + 1 Power, Output (mW): 13.5 to 16.5 Warm-up period to spec performance (minutes): <= 15 Beam quality, x-axis (M^2): < 1.2 Beam quality, y-axis (M^2): < 1.2 Beam waist location, x-axis (mm):  Note: with respect to front of laser: 42 + 75 Beam waist location, y-axis (mm):  (Note: with respect to front of laser) 42 + 75 Beam Diameter (at 1/e^2)  Measurement method: ModeMaster Vertical Waist (µm): 272 to 368  Horizontal Waist (µm): 272 to 368  Ellipticity: <=1.1:1 Beam Divergence (Full angle at 1/e^2 diameter)  Vertical (mrad): <3 Horizontal (mrad): <3 Beam Centration (mm):  (Note: with respect to center of laser aperture) + 1 Boresight (mrad):  (Note: with respect to laser baseplate) <= 5 Transverse Mode: Single Longitudinal Mode: Multiple Polarization  Orientation : Any Reference Plane: Baseplate Ratio: >= 100:1 Beam pointing at constant temperature  Beam Deviation (µrad): <= 20 Temperature (◦C): Constant +1 Time (hrs): <8 Beam pointing vs. Temperature  Beam Deviation (µrad/◦C): (Note: Maximum change of 5 ◦C/hour)   <12 Power Stability  Stability (%): < + 2 Time (hours): < 8 Frequency Range (Hz): Dc to 20 Amplitude Noise, Optical  rms (%): <0.5 Peak-to-peak (%): <3 Frequency Range:  20 Hz to 100 kHz Mechanical configuration: Per MG P/N:85-GCJ-015-074OM Description: Outline & Mounting, 85-GCJ-015-074 Rev D Cable length, laser to controller (inch): 24+1 Mechanical Shutter: No DC Power Supply: No Operator’s manual:  One time via email Software/Firmware  User Interface Software: None Electrical Specifications Input: Vdc Voltage (Vdc): 4.75 to 5.25 Power: < 25 Environmental Specifications Cooling, Laser: conductive Cooling, controller: conductive Temperature, Operating (◦C): +10 to +40 Temperature, Storage (◦C): -10 to +50 Relative Humidity, non-condensing (%): < 95 Mounting orientation: Any Shock, non-operating: <25g, <16 msec Vibration, operating (g, ms): <0.3g, 5 to 500 Hz Sinusoid, 0.25 octave per minute Vibration, non-operating (g, ms): <5.0 g, 5 to 500 Hz Sinusoid, 0.25 octave per minute Altitude (m): 0 to 3000 Miscellaneous Specifications Packaging   Testing Requirements: ISTA Procedure 2A Statutory Requirement None Regulatory Requirement Agency:  US: CDRH 21 CFR 1040.10 EU:IEC 60825-1:2014 Laser Classification: IEC: 3B CDRH: IIIb