PEM self-clinching stud FH-M5-20

Description

***** SOLD IN LOTS OF 10 *****
PEM self-clinching stud FH-M5-20. New Factory Surplus, Stock #C18-11 . Will Combine Shipping. please check on quantity shipping.
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.
Flush-head for sheet thickness of 1.00mm and greater.
Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 80 or less and HB (Hardness Brinell) 150 or less.
more
Specifications
Thread Size x Pitch
M5 x 0.8
Thread Code
M5
Length Code
20
Material Code
S
Min. Sheet Thickness
1 mm
Hole Size in Sheet + 0.08
5 mm
Max. Hole in Attached Parts
5.60 mm
L - Length ± 0.4
20 mm
a1374.jpg
H ± 0.4
6.5 mm
S Max.1
2.7 mm
Min. Dist. Hole C/L to Edge
7.2 mm
For Use in Sheet Hardness
HRB 70 / HB 125 or Less
Thread Specification
External, ASME B1.13M, 6g
Fastener Material
300 Series Stainless Steel
Standard Finish
Passivated and/or tested per ASTM A380
Visit our store for 1000's of items!
We are an electronics recycling firm dedicated to keeping good parts out of landfills.  We resell overstock and carefully reclaim parts to be reused instead of discarded.  We are doing our part to help our environment and save you $.
View more great items
On Feb-28-18 at 19:45:19 PST, seller added the following information:
Feedback
From Buyer
Date/time
VERY fast shipping. Thank you!
r*******0 ( 290
)
2018-03-16
02:50:19