Thread Rolling Head / Die - M2x0.4 (rod/spoke threading head) Gewinderollkopf

Description

Size M2x0.4. Body diameter 25 or 20 mm, length 25 mm.
Important - use LOW
cutting speed 20-90
m
/
min
for thread rolling (or roll manually)
Recommended to use on materials up to 900 MPA (UTS),
for stronger materials use
annealing to make it
workable.
Important chart for chosing rods:
Official info (translated):
"Thread Rolling Dies ensure formation of the 6th degree of accuracy in accordance with GOST 16093-81.
Roller material - chrome or alloy tool steel. Multiple-thread rollers.
Dies are self-threaded on the wrap that allows multiple reinstalls.
The total resistance of the dice is 25-30 times higher than cutting dies.
Manufacturer - Kharkov Tool Factory"
My personal thoughts:
Rolls excellent thread even on worn rods
Raises a thread to the proper level even on the average fasteners.
If you use a lubricant (highly recommended), it is practically unbreakable, you can forget about regular dies.
Also can be used for thread rolling on spokes, where conventional dies are unacceptable.
Shipping:
FREE to Europe,
N. & S. America, UK
for other locations:
contact to get shipping costs
If you have any questions please feel free to e-mail me
To my International buyers, although I don't charge for Shipping,
I am not responsible for for any taxes, fees, duties or other charges which
may be imposed by your post office or government agency in your country.
If in doubt, please check with your own post office before placing a bid.
Shipping Time:
International Airmail Shipping normally takes 10-20 working days for delivery
(Rarely packages may be delayed due to some country's customs and security policies (e. g. Brazil). Please be patient if this happens)
Tracking Info:
Please, use this site for tracking:
www.track-trace.com/post
(Ebay supports detailed tracking only for US based carriers)